PAPER: UV laser induced changes to morphological, optical and electrical properties of conductive na

DIAMOND AND RELATED MATERIALS The possibility of laser induced variation of optical and electrical properties of conductive nanocrystalline diamond (CNCD) films has been demonstrated. The films were produced by microwave plasma chemical vapor deposition (MPCVD) from CH4:H2:N2 gas mixtures. The films were irradiated in air with 20 ns pulses of an ArF excimer laser (λ =193 nm). It was found that low laser pulse intensity (~ 0.05 J/cm2), well below film surface graphitization (~ 0.3 J/cm2) and nanoablation (~ 0.08 J/cm2) thresholds, induces changes of the film properties. The effect requires multiple pulsed irradiation and results in a decrease of the film electrical conductivity, which is accompanied by optical bleaching of the diamond film absorption.

Fig. 3. Conductivity (a) and morphology (b) measurements of diamond film by use of AFM. The left side of the scans corresponds to the initial film and right parts to the spot after laser irradiation. (c) Current and height vs distance across the boundary between pristine and irradiated parts of the CNCD film. (d) A schematic of conductive AFM. To make a complete circuit, the CNCD film and native silicon oxide were removed from the silicon substrate with mechanical etching just outside the region of interest, and silver paint was applied to provide a high quality contact.

Read the full article

#research #technical #nanocrystalline #diamondfilms #DiamondandRelatedMaterials

More News